Titan Controls

Controls and monitors CO2 from 0 to 2000 parts per million (PPM). CO2 enrichment or CO2 exhaust features. Easy to set-up and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 Volts/60 Hz.

Temperature control range is 55 F to 95 F. Controls cooling or heating equipment. Day and night settings keep temperature within 4 F of set point. 6 ft temperature probe is accurate to within 2 F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/120 Volts/60 Hz.

This controller will run four (4) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Plug relay trigger cord into 24 hour wall timer to run your lights. Universal outlets allow total flexibility. Enclosure resists dust, rust and moisture. 30 Amps input power/20 Amps output power/240 Volts/60Hz./4000 Watts.

This controller will run eight (8) HID lights at 240 Volts. The only lighting controllers featuring two (2) industrial-grade ballast rated relays. Plug dual relay trigger cord set into 24 hour wall timers to run your lights. Universal outlets allow total flexibility. Enclosure resists dust, rust and moisture. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts.

Atlas? 1 CO2 Monitor/Controller comes with a 25 foot remote sensor. It features adjustable set point and elevation levels, a built in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO2. Simple to use and easy to operate. 15 Amps/120 Volt/60 Hz. Replacement sensor can be purchased separately. The sensor comes factory calibrated for precise CO2 readings and utilizes low voltage technology to avoid Radio Frequency...

Preset CO2 control at 1500 PPM. Built-in self calibration feature. Easiest to use CO2 Controller on the market. Simply plug in your CO2 generator or regulator and you are ready to go. Built-in photocell allows CO2 enrichment only during daylight hours. Durable powder-coated steel enclosure. 15 Amps maximum/120 Volts/60 Hz. Patent No. D657,748.

Controls day and night temperature and CO2 in your garden. Activates CO2 ON outlet only during daylight hours. Now featuring programmable delay. Ten (10) minute CO2 delay feature allows maximum CO2 coverage with minimum CO2 waste or can be set for use with bottled CO2. Features a Night Only and Night Heat outputs to assist the gardener with the maintenance of the garden after the lights have turned off. Easy to understand and use with highlighted Grow Zones. 25 ft modular remote temperature...

This controller will run four (4) HID lights at 120 Volts ? maximum 4000 Watts. The only lighting controllers featuring industrial-grade ballast rated relays. 120 Volt accessory timed outlet to activate in-line fans to cool your lamps. 24 hour timer with 15 minute non-detachable setting tabs. Four (4) NEMA 5-20 outlets. Removable back panel makes controller easy to wire into your power system. On/Off switch that makes lamp replacement easy. Durable powder-coated steel enclosure. 50 Amps input...

This controller will run four (4) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Plug relay trigger cord set into 24 hour wall timer. 120 Volt timed accessory outlet (max 2 Amps) for light mover or fan. Removable back panel makes controller easy to wire into your power system. Durable powder-coated steel enclosure. 30 Amps input power/20 Amps output power/240 Volts/60 Hz./4000 Watts. Patent No. D660,252.

This controller will run eight (8) HID lights at 240 volts. The only lighting controllers featuring two (2) industrial-grade ballast rated relays. Plug relay trigger cord set into 24 hour wall timer. Removable front panel makes controller easy to wire into your power system. Durable powder-coated steel enclosure. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts. Patent No. D660,252.

This controller will run four (4) HID lights at 240 Volts ? maximum 4000 Watts. The only lighting controllers featuring industrial-grade ballast rated relays. 120 Volt accessory timed outlet (max 2 Amps) to activate in-line fans to cool your lamps. Plug relay trigger cord set into 24 hour wall timer. Universal outlets allow total flexibility. On/Off switch that makes lamp replacement easy. Removable back panel makes controller easy to wire into your power system. Durable powder-coated steel...

10 second to 20 minute ON TIME. 1 minute to 12 hours OFF TIME. Controls timed equipment during daytime only, nighttime only or both. Use to time fans, pumps or CO2. Enclosure protects internal components from dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.